Van Car Decals

Hobo Armour Van and Car Decals 

SIzes as follows: 

HoboArmour.com   

SMALL-250mm x 100mm 

Large- 600mm x 230mm 

Never Fade Away   

Small  300mm x 300mm 

Small Square Hobo   

150mm x 90mm

Small Hobo Armour with Skull 

150mm x 50mm

 Application: 

1. Begin by ensuring the surface you are sticking your vinyl sticker on is clean and dust or dirt free. Although incredibly durable, vinyl stickers are made from a reasonably thin material that can easily show dust or dirt on the surface through your sticker, so it is vital your surface is completely clean. 
2. If you want it to be extra clean, and you are sticking it onto a car or window, you could use soapy water or a specific cleaning product. If doing so, be sure your surface is completely dry before applying the vinyl sticker.
3. Use a credit card or similar object to make a squeegee and press down on your decal to ensure there are no bubbles on the sticker. 
4. Without removing the backing, line up your sticker to where you want it to be, either by marking on the product or familiarising yourself with the surface.
5. Starting from a corner of the sticker, peel the sticker away from the white backing, so that the full sticker pulls away from the backing.
6. Lightly place the sticker down onto your chosen surface, and readjust the sticker so it is centred and where you need it to be.
7. Use a squeegee to firmly set the sticker down, going from the middle out, removing any remaining bubbles too.
8. If your vinyl sticker has transfer tape, once the sticker has been firmly attached, peel back the transfer tape leaving the sticker firmly in place. Do this slowly and carefully and use your fingers to keep the vinyl sticker in place if needed.

Please NOTE that sizes may Vary slightly. 

You do not get any equipment with the prints.

The vinyl prints are your responsibility to fit. Hobo Armour 23 LTD take no responsibility to damages to paintwork on any vehicles, you fit them at your own risk.